Centrifugal Cyclone Sand Water Treatment Equipment in Environment Protection
Introduction
cyclone desander is according to the fluid of solid particles in the desander in screening principle rotation was made, set cyclone and filter as a whole, in the field of water treatment to achieve sand removal, turbidity, solid-liquid separation effect. Widely used in water source heat pump, water treatment, food, pharmaceutical and other industrial sectors. River water, well water sand, coal washing water, industrial concentration, solid-liquid separation, separation of liquid and gas and in liquid immiscible. The work principle of cyclone desander is based on the principle of centrifugal sedimentation and density difference, when the water under pressure from the sand inlet tangential enters the equipment, to create a strong rotation, because of sand and water of different density, in the action of centrifugal force, the centripetal force, buoyancy and fluid the drag force, the low density water rises, discharged from the water outlet, sand density by equipment at the bottom of the sewage outfall discharge, so as to achieve the purpose of removing sand. in a certain range and conditions, desander inlet pressure is greater, sand removal rate is high, and can be installed in parallel using.Scope of application
1. Mainly applied to water quality treatment and control for the raw water and water supplying, such as: River water, well water desanding, coal washing water, mineral separation, solid-liquid separation, gas and liquid immiscible liquid separation.
2. It can be widely applied to the water source heating pump system, a heating water, central air conditioning cooling water, chilled water, steel, power, chemical and other industrial and mining enterprises, tap water, sea water, surface water, ground water.
Product characteristics:
1. No energy consumption, good sand removing effect, especially suitable for sand content higher system using.
2. Low cost, convenient installation and operation, safe and reliable operation, small size, processing a large quantity of water, small occupied area.
Technical parameters
Processing effect
Input water quality
3. Desanding diameter: >0.1mm
Turbidity of raw water: ≥ 300 degree
5. Output water turbidity: ≤ 10 degree
Input water pressure: ≥ 0.2-0.25Mpa
6. Water head loss: <0.02Mpa
Working temperature: Normal
H1. Height from top to sewage outfall.
L. Distance between two supporting legs.
H2. Height from top to ground.
Cyclone sand filter(model) |
Flow rate(T/h) |
Input pressure(Mpa) |
Max partition size diameter(mm) |
partition size(um) |
Desanding efficiency |
dimension (mm) |
Water Inlet (mm) |
Water outlet (mm) |
Sewage outfall (mm) |
Weight (kg) |
H1 |
L |
H2 |
YLXC–25II |
18 |
0.15-0.4 |
1.5 |
30-70 |
>96 |
850 |
273 |
1100 |
25 |
40 |
25 |
40 |
YLXC–40II |
25 |
0.15-0.4 |
2 |
40-100 |
>96 |
1050 |
273 |
1250 |
40 |
50 |
25 |
50 |
YLXC–50II |
40 |
0.15-0.4 |
3 |
40-100 |
>96 |
1100 |
273 |
1360 |
50 |
65 |
25 |
60 |
YLXC–80II |
60 |
0.15-0.4 |
3 |
40-100 |
>96 |
1150 |
273 |
1410 |
80 |
100 |
40 |
120 |
YLXC–100II |
100 |
0.15-0.4 |
6 |
50-150 |
>95 |
1200 |
325 |
1450 |
100 |
125 |
40 |
130 |
YLXC–125II |
160 |
0.15-0.4 |
10 |
74-200 |
>95 |
1250 |
377 |
1500 |
125 |
150 |
50 |
180 |
YLXC–150II |
200 |
0.15-0.4 |
10 |
74-200 |
>92 |
1350 |
426 |
1600 |
150 |
200 |
50 |
240 |
YLXC–200II |
250 |
0.15-0.4 |
16 |
74-220 |
>92 |
1450 |
530 |
1700 |
200 |
250 |
65 |
350 |
YLXC–250II |
300 |
0.15-0.4 |
16 |
80-230 |
>92 |
1550 |
630 |
1800 |
250 |
300 |
65 |
400 |