Duplex Single-bag Filter Housing Water Treatment Equipment

Multiple Filter Bag 
The filter bags for Filter bag housing is standard #1(7*17 inch) or #2(7*32 inch) bag, With holding ability from 1 bag (single bag) up to 12 bags. 
Standard design pressure is 1.0mpa. It could also be customized for higher pressure.

The sizes of these pores are between the  1-300 micron.
The capacity depends on the surface area from the bags. Bigger systems can clean up to more than 500 m3 /h (multi bag filters)
There are special bags for various chemicals.

Engineering

The liquid flows from the top of the filter house (manufactured in either stainless or epoxy coated carbon steel) and is distributed equally amongst the bags. The liquid comes out at the bottom leaving the dirt behind.
Since the bag is locked in at the top of the vessel all the dirt is trapped inside the bag. The filter vessel never requires cleaning after use.
Bag filters systems are applied is various industries solutions. Treated liquids include: milk products, paint, lime, beer etc.
It can also help you with replacement from various filter bags.

Features
AAA:
 
01. What is the capacity (m3/hour)you required for this equipment?
02. What is the material for this bag filter?
Stainless steel (SS304/SS316)?
03. What is the working pressure for it?
04. What is the filtration degree?
10 micron or 200 micron?
 
Technical parameters of bag filter: